Ford 9", 6 Lug, Unit Hub Wheel Bearing Assembly, 30 or 35 Spline for Dana 60

SKU:
HA6x5.5-35
Sale Price $452.10
This Item is eligible for free delivery
accept payment

Description

Nitro Gear & Axle 6 Lug Unit Bearing Hub Assembly

Designed for ideal use with:

AXN46102 Stub Axles

NPD60-SLUG Slug kits

NPWOEK 3" and 3.5" Weld on housing ends

WARRANTY

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.

WARNING:

This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov

Features

  • 1/2"-20 Thread-In Wheel Studs
  • Accepts 30 & 35 Spline Axles
  • 6x5.5" Bolt Pattern
  • Roll Pin to retain spindle nut and prevent backing off
  • Bolts up to any Trail Gear, Currie, or Spidertrax housing end
  • Accepts drive flange or manual locking hubs
  • Not compatible with ABS/ESC systems as this hub assembly does not include a tone ring
  • Bearing is based on 99-04 Ford Superduty F350/F450 Unit Bearing

Packaging

Box Weight: 15 lb

Box Dimensions: 1 x 1 x 1 in

Shopper Approved Review

Related Products
  • Ford 10.5" 4.30 Ring and Pinion
    SKU :
     F10.5-430-NG
    Sale Price $377.30
    * Free Shipping
  • Ford 10", 5.33, Nitro Pro Ring & Pinion
    SKU :
     F10-533-NG
    Sale Price $1,324.40
    * Free Shipping
  • Carrier Bearing Race for Dana 44
    SKU :
     BRG25523
    Sale Price $9.19
    * Free Shipping
  • Nitro Gear & Axle AAM 11.5" 4.56 Ratio Ring & Pinion
    SKU :
     AAM11.5-456-NG
    Sale Price $567.60
    * Free Shipping
  • Need Help?

    Contact Us

    To Top