Nitro Bearing Kit for Dana 60

Price $176.67
This Item is eligible for free delivery
accept payment


Bearing Kit for Dana 60 & 61

Kit Contents:

Pinion Bearings/Races

Carrier Bearings/Races

Pinion Seal

Crush Sleeve

Marking Compound with Brush

The kits assembled by Nitro Gear & Axle only uses the highest quality bearings available from Timken & Koyo. Nitro Gear & Axle does not use any cheap Chinese bearings. By using only Timken & Koyo bearings just like all of the OEM vehicle manufacturers you can be assured that your differential will be reliable, durable, & quiet for years to come.


Differential: Dana Spicer Model 60

Kit Assembly by: Nitro Gear & Axle


1967-1969 Ford F100 1/2 Ton Pickup Dana 60 Rear

1967-1985 Ford F250 3/4 Ton Pickup Dana 60 Rear

1983 Ford F350 1 Ton Pickup Dana 60 Rear

1968-1975 Ford E300 Van Dana 60 Rear

1967-1977 Ford P350 Delivery Van Dana 60 Rear

1980-2001 Ford E250 Van Dana 60 Rear

1988-2001 Ford E350 Van Dana 60 Rear

1968-1977 Chrysler 'B' Body with Hemi or 440 Dana 60 Rear

1969-1978 Chrysler 'E' Body with Hemi or 440 Dana 60 Rear

1970-2001 Dodge B300 1 Ton Van and MotoRight Handome Dana 60 Rear

1967-1993 Dodge D200 W200 D250 W250 3/4 Ton Dana 60 Front or Rear

1994-2002 Dodge D2500 W2500 with 5.2L or 5.9L V8 Dana 60 Front or Rear

1975-2002 Dodge W300 W350 W3500 1 Ton Pickup Dana 60 Front

1968-1970 Chevy C10 Pickup Dana 60 Rear

1968-1972 Chevy C20 C25 K25 3/4 Ton Pickup Dana 60 Rear

1977-1991 Chevy GMC K30 V30 1 ton Pickup Dana 60 Front

1973-1991 Chevy & GMC G30 G300 1 Ton Van Dana 60 Rear

1967-1975 International1000 1100 1200 Pickup & Wagon Dana 60 Rear

1969-1988 Jeep J20 3/4 Ton Pickup Dana 60 Rear

1978-1979 Ford F250 F350 Snowfighter & Super Cab Dana 60 Front or Rear

1985-1998 Ford F350 Pickup Dana 60 Front

1999-2001 Ford F350 Superduty DRW Dually Dana 60 Front

2002-2009 Ford F250 & F350 Superduty SRW & DRW Dana 60 Front


Tera 60 60R

Dynatrac Pro Rock 60

Currie Rock Jock 60

Rockcrusher 60R

Solid Axle Ind. 60


*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.


Box Weight: 7 lb

Box Dimensions: 1 x 1 x 1 in

Shopper Approved Review

Related Products
  • Rear Pinion Bearing D80
    In stock
    SKU :
    Price $61.60
  • GM 8.5" 30 Spline Nitro Rear Axle Shaft for Chevrolet S-10 1998-2005
    In stock
    SKU :
    Price $156.67
    * Free Shipping
  • BRGHM88649 Bearing
    In stock
    SKU :
    Price $16.69
    * Free Shipping
  • Nitro Gear & Axle 7.5" Master Install Kit
    In stock
    SKU :
    Price $128.89
  • Pinion Flange, 29 Spline, For use with Toyota Driveshaft for Dana 60
    In stock
    SKU :
    Price $155.56
    * Free Shipping
  • Nitro Gear & Axle GM 7.5 26 Spline 29-1/16 Rear Axle Shaft
    In stock
    SKU :
    Price $136.67
  • Need Help?

    Contact Us

    To Top