Chrysler 8.25" 4.10 Nitro Ring & Pinion

Tech Note:

Use with M8.0-410-NG front ring & pinion on Jeep WK.

Dual-drilled ring gear with 3/8" & 10MM bolt holes.

Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford & Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps ensure excellent fitment, ideal contact pattern and smooth, quiet operation.

• Dual-Drilled SAE & Metric

Box Weight: 17 lb

Box Dimensions: 1 x 1 x 1 in

Differential: Chrysler 8.25"

Gear Ratio: 4.10

Tooth Count: 41/10

Pinion Splines: 27

Ring Gear Bolts: (not included)

Manufacturer: Nitro Gear & Axle

Warranty: 2 Years

FITMENT

1975-1983 Chrysler Cordoba

1983-1989 Chrysler Fifth Avenue

1977-1983 Chrysler Lebaron

1977-1989 Dodge Diplomat

1979-1981 Dodge St. Regis

1976-1980 Plymouth Volare

1975-1993 Dodge Ramcharger

1975-1981 Plymouth Trailduster

1970-1993 Dodge B100 B150 Van

1976-1993 Dodge D100 D150 W100 W150 Pickup

1986-2009 Dodge Dakota 2wd

1997-1999 Dodge Dakota & Durango 4x4

1991-2001 Jeep Cherokee XJ

2002-2007 Jeep Liberty KJ

WARRANTY

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.