Toyota 9.5" 4.88 Ratio Nitro Rear Ring & Pinion 1998 & Newer Design

Supercedes Nitro p/n TLC100-488-NG)

Tech Note:

32 spline pinion, is a direct fit for 2008 Models, is an Upgrade for 1998-2007 vehicles, which will require YOKT60060 & MKT9.5.

Also Available in complete 4x4 Gear Package Kits with Front and Rear Ring & Pinions and Master install kits below!

GPTOY100-4.88-1

GPTOY100-4.88-2

GPTOY200-4.88

Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford & Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps ensure excellent fitment, ideal contact pattern and smooth, quiet operation.

• 32 spline pinion upgrade for 1998-2007 models
• 8620 gear forging
• Precision machined
• Triple lapped
• Rockwell hardness tested

Box Weight: 17 lb

Box Dimensions: 1 x 1 x 1 in

Differential: Toyota 9.5" Rear

Gear Ratio: 4.88

Tooth Count: 39/8

Pinion Splines: 32

Ring Gear Bolts: 12 (not included)

Manufacturer: Nitro Gear & Axle

Warranty: 2 Years

FITMENT

Rear Diff:

**1998-2007 models will require yoke YOKT60060 and Install Kit MKT9.5**

1998-2007 Land Cruiser 100 Series, HDJ100, HZJ105, FZJ100, FZJ105, UZJ100

1998-2007 Land Cruiser Burbuja & Autana (Venezuela)

1998-2007 Land Cruiser 70 Series

(matching front gear T8R-488R-NG)

2008 & Newer Land Cruiser 70 Series

(matching front gear T8R-488R-NG)

Use MKT9-5-ELOC Nitro Master Install Kit with OEM 32 spline pinion E-Locker.

2007-2014 Tundra w/ 4.6L 1UR-FE or 4.7L 2UZ-FE

2008 & Newer Land Cruiser 200 Series, GRJ200 URJ200 VDJ200

(matching front gear T9R-488R-NG)

WARRANTY

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.