Nitro Gear & Axle T100 w/o Locker Carrier Kit for Toyota 1993-2015
Toyota T100 & Tacoma Nitro Carrier Bearing Kit
Carrier bearings x2
Carrier Races x2
Carrier Shim Kit X2
Aftermarket shims fit underneath the bearing.
Use in Fits without locker.
Nitro Carrier Bearing Kits are available for individuals who are changing out a differential in a late model or lower mile vehicle (typically with a drop-out housing) so you can simply swap the ring gear, press on the new bearings and get back on the road faster. Vehicles with drop-out housings don't lose pinion preload when just changing the carrier so you won't need pinion bearings. Carrier bearings cannot be removed without damage except with special tools.
Nitro bearing kits contain Koyo bearings. "Koyo is a leading manufacturer and supplier to the Automotive original equipment market. The bearings supplied to the original equipment market are also available for aftermarket repair requirements. Koyo bearings can be found in, and are available, for Fits such as Wheel, Clutch, Belt Tensioners and Transmissions, as well as other common automotive repair Fits. Bearings are available for most domestic and import Fits.When looking for original equipment repair bearings, contact Koyo, a Smart Choice".www.jtekt.com
Differential: Toyota 8.4"
Carrier: non E-Locker Carriers
Ring Gear Bolts: 12 (not included)
Manufacturer: Nitro Gear & Axle
2000-2006 Tundra 4x4
2000-2007 Sequoia 4x4
*non E-Locker Only
*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.
Box Weight: 7.5 lb
Box Dimensions: 1 x 1 x 1 in