Nitro Master Install Kit, 220mm for Jeep Wrangler JL 2018-2021
AdvanTEK 220mm Jeep Wrangler JL Rubicon Nitro Rear Master Install Kit
Recommended: 3 quarts of Nitro Synthetic Plus Gear Lube
Front Pinion Seal X1
Inner Pinion Bearing & Race X1
Outer Pinion Bearing & Race X1
Carrier Bearings X2
Carrier Shim Kit X1
Pinion Depth shim Kit X1
Crush Sleeve X1
Pinion Nut X1
Front Pinion Baffle X1
Front Outer Pinion Slinger X1
Ring Gear Bolts X10
Marking Compound x1
The kits assembled by Nitro Gear & Axle only use the highest quality bearings available from Timken & Koyo. Nitro Gear & Axle does not use any cheap Chinese bearings. By using only Timken & Koyo bearings just like all of the OEM vehicle manufacturers you can be assured that your differential will be reliable, durable, & quiet for years to come.
Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro we know differentials, and know what it takes to provide you with high quality components.
"The Spicer and AdvanTEK Trademarks referred to herein are trademarks of Dana Limited. The Spicer and AdvanTEK trademarks are used for informational purposes only, and there is no connection between Nitro Gear & Axle or JT's Parts & Accessories and Dana."
Differential: AdvanTEK 220mm
Ring Gear Bolts: Not included
Manufacturer: Nitro Gear & Axle
2018 & Newer Jeep Wrangler JL Rubicon
*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.
In addition to the above conditions, see special notes for these products:
Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.
Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.
Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.
Box Weight: 6 lb
Box Dimensions: 1 x 1 x 1 in