Toyota 8" IFS Clamshell Nitro Solid Pinion Pre-load Spacer

Includes:

Machined Solid Pinion Pre-load Spacer

Pre-load Adjustment Shims

Tech Note:

When using a solid spacer you will need to remove the baffle.

Nitro's Solid Pinion Preload spacers increase durability and integrity of your setup, by eliminating the use of a crush sleeve. Once preload has been set, it will not change, and allows you to swap yokes, or seals in the future without worry of over-crushing the factory crush sleeve. Nitro offers the widest variety of solid preload spacer kits around.

Box Weight: 1 lb

Box Dimensions: 1 x 1 x 1 in

Differential: Toyota 8" IFS Clamshell

Manufacturer: Nitro Gear & Axle

Warranty: Lifetime

WARRANTY

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.