GM 7.5" & 7.625" 1982-1999 Nitro Rear Master Install Kit

Recommended: 3 quarts of Nitro Synthetic Plus Gear Lube

Kit Contents:

Pinion Bearing & Race x2

Carrier Bearing & Race x2

Pinion Nut x1

Pinion Seal x1

Pinion Shims

Carrier Shims

Ring Gear Bolts x10

Gasket x1

Crush Sleeve x1

Marking Compound x1

Brush x1

Loctite x1

The kits assembled by Nitro Gear & Axle only use the highest quality bearings available from Timken & Koyo. Nitro Gear & Axle does not use any cheap Chinese bearings. By using only Timken & Koyo bearings just like all of the OEM vehicle manufacturers you can be assured that your differential will be reliable, durable, & quiet for years to come.

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro we know differentials, and know what it takes to provide you with high-quality components.

Box Weight: 6 lb

Box Dimensions: 1 x 1 x 1 in

Differential: GM 7.5" & 7.625"

Ring Gear Bolts: 10 (included)

Manufacturer: Nitro Gear & Axle

FITMENT

1982-1988 Chevy Monte Carlo

1982-1988 Chevy El Camino

1982-1987 GMC Caballero

1982-1988 Chevy Caprice

1982-1985 Chevy Impala

1982-1987 Buick Regal

1982-1988 Oldsmobile Cutlass Supreme

1982-1987 Pontiac Grand Prix

1982-1983 Pontiac Le Mans

1982-2004 Chevy S10 T10 Pickup

1982-1990 GMC S15 T15 Pickup

1991-2004 GMC Sonoma Pickup

1982-2005 Chevy S10 Blazer

1982-2005 GMC S15 Jimmy

1985-2003 Chevy Astro Van

1985-2003 GMC Safari Van

1992-1993 GMC Typhoon

1991 GMC Syclone

1982-2002 Chevy Camaro

1982-2002 Pontiac Firebird

1982-2002 Pontiac Trans Am

1996-2000 Isuzu Hombre

1991-1997 Isuzu Rodeo

WARRANTY

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.