Dana Model 60 & Dana 61 Nitro Front Master Install Kit

Recommended: 4 quarts of Nitro Synthetic Plus Gear Lube

Tech Note:(Includes Common Inner Axle Seals)

Kit Contents:

Pinion Bearing & Race x2

Carrier Bearing & Race x2

Pinion Nut x1

Pinion Nut Washer x1

Pinion Seal x1

Pinion Depth Shims

Pinion Preload Shims

Inner Slinger x1

Outer Slinger x1

Carrier Side Shims

Ring Gear Bolts x12

Front Inner Axle Seal x2

Gasket x1

Crush Sleeve x1

Marking Compound x1

Brush x1

Loctite x1

The kits assembled by Nitro Gear & Axle only use the highest quality bearings available from Timken & Koyo. Nitro Gear & Axle does not use any cheap Chinese bearings. By using only Timken & Koyo bearings just like all of the OEM vehicle manufacturers you can be assured that your differential will be reliable, durable, & quiet for years to come.

Nitro Gear & Axle strives to provide the highest quality differential components available. We take the steps necessary to ensure our parts are dependable. Our product range is continually growing to meet the needs of consumers for new ratios and Fits. At Nitro, we know differentials and know what it takes to provide you with high quality components.

The Dana 60 & Dana 61 Trademarks referred to herein is a trademark of Dana Limited. The 60 & Dana 61 Trademarks is used for informational purposes only, and there is no connection between Nitro Gear & Axle or JT's Parts & Accessories and Dana .

Box Weight: 9 lb

Box Dimensions: 1 x 1 x 1 in

Differential: Dana Model 60 & Dana 61

Gear Ratio: All Ratios

Axle Seals: Included

Ring Gear Bolts: 12

Manufacturer: Nitro Gear & Axle

FITMENT

1967-1993 Dodge D200 W200 D250 W250 3/4 Ton D60 Front

1994-2002 Dodge D2500 W2500 with 5.2L or 5.9L V8 D60 Front

1975-2002 Dodge W300 W350 W3500 1 Ton Pickup D60 Front

1977-1991 Chevy GMC K30 V30 1 ton Pickup D60 Front

1978-1979 Ford F250 F350 Snowfighter & Super Cab D60 Front or Rear

1985-1998 Ford F350 Pickup D60 Front

Rockcrawler

Tera 60 60R

Dynatrac Pro Rock 60

Currie Rock Jock 60

Rockcrusher 60R

Solid Axle Ind. 60

WARRANTY

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.