GM 7.5" & 7.625" 10 Bolt 4.56 Nitro Ring & Pinion

Tech Note:

Requires Nitro Notched Cross Pin Shaft.

Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford & Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps ensure excellent fitment, ideal contact pattern and smooth, quiet operation.

Box Weight: 13 lb

Box Dimensions: 1 x 1 x 1 in

Differential: GM 7.5" & 7.625 10 Bolt

Gear Ratio: 4.56

Tooth Count: 41/9

Pinion Splines: 27

Ring Gear Bolts: 10 (not included)

Manufacturer: Nitro Gear & Axle

Warranty: 2 Years

FITMENT

1982-2002 Chevy & GMC S10 Pickup

1982-2002 Chevy & GMC S10 Blazer Jimmy

1985-2003 Chevy Astro Van

1985-2003 GMC Safari Van

1992-1993 GMC Typhoon

1991 GMC Syclone

1982-2002 Chevy Camaro

1982-2002 Pontiac Firebird

1982-2002 Pontiac Trans Am

1978-1988 Chevy Monte Carlo

1978-1987 Chevy El Camino

1978-1987 GMC Caballero

1978-1988 Chevelle Malibu

1978-1993 Chevy Caprice Impala

1978-1987 Buick Regal

1978-1988 Pontiac Grand Prix

A-Body

F-Body

G-Body

WARRANTY

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.